Fulvic acid foliar application: a novel approach enhancing antioxidant capacity and nutritional quality of pistachio (Pistacia vera L.).

BACKGROUND: The global growth of pistachio production has prompted exploration into sustainable agricultural practices, on the application of humic substances such as fulvic acid in enhancing the quality of horticultural crops. The present study was carried out in Qom province, Iran, on 20 years old pistachio (Pistacia vera L. cv. Kaleh-Ghoochi) trees and investigated the impact of foliar spraying of fulvic acid at varying concentrations (1.5, 3, and 4.5 g L- 1) on the antioxidant and quality properties of pistachio. The different concentrations of fulvic acid were applied at two key stages: at the initiation of pistachio kernel formation (late June) and the development stage of pistachio kernel (late August), as well as at both time points. Following harvest at the horticulturally mature phase, various parameters, including total phenols, flavonoids, soluble proteins, soluble carbohydrate content, antioxidant capacity, and antioxidant enzyme activity, were assessed. RESULTS: Results indicated that foliar application of fulvic acid, particularly at 1.5 g L- 1 during both late June and August, effectively increased phenolic compounds (31.8%) and flavonoid content (24.53%). Additionally, this treatment also augmented antioxidant capacity and heightened the activity of catalase (CAT) (37.56%), ascorbate peroxidase (APX) (63.86%), and superoxide dismutase (SOD) (76.45%). Conversely, peroxidase (POX) (41.54%) activity was reduced in fulvic acid-treated nuts compared with controls. Moreover, the content of chlorophyll (45%) and carotenoids (46.7%) was enhanced using this organic fertilizer. In terms of mineral elements, the increment was observed in zinc (Zn) (58.23%) and potassium (K) (28.12%) amounts in treated nuts. Additionally, foliar application of fulvic acid led to elevated levels of soluble carbohydrates and proteins in treated nuts. CONCLUSIONS: In the present study, application of fulvic acid resulted in enhancement of antioxidant activity and quality traits of pistachio nut through an increase in total phenol, flavonoids, chlorophyll, carotenoids, K, Zn, and also activity of antioxidant enzymes. Therefore, use of fulvic acid emerges as a promising strategy to enhance the quality and nutritional attributes of pistachios, contributing to sustainable agricultural practices and improved crop outcomes.

Morphological and pomological assessments of seedling-originated walnut (Juglans regia L.) trees to select the promising late-leafing genotypes.

BACKGROUND: In many parts of the world, including Iran, walnut (Juglans regia L.) production is limited by late-spring frosts. Therefore, the use of late-leafing walnuts in areas with late-spring frost is the most important method to improve yield. In the present study, the phenotypic diversity of 141 seedling genotypes of walnut available in the Senejan area, Arak region, Markazi province, Iran was studied based on morphological traits to obtain superior late-leafing genotypes in the cropping seasons of 2022 and 2023. RESULTS: Based on the results of the analysis of variance, the studied genotypes showed a significant variation in terms of most of the studied morphological and pomological traits. Therefore, it is possible to choose genotypes for different values ​​of a trait. Kernel weight showed positive and significant correlations with leaf length (r = 0.32), leaf width (r = 0.33), petiole length (r = 0.26), terminal leaflet length (r = 0.34), terminal leaflet width (r = 0.21), nut length (r = 0.48), nut width (r = 0.73), nut weight (r = 0.83), kernel length (r = 0.64), and kernel width (r = 0.89). The 46 out of 141 studied genotypes were late-leafing and were analyzed separately. Among late-leafing genotypes, the length of the nut was in the range of 29.33-48.50 mm, the width of the nut was in the range of 27.51-39.89 mm, and nut weight was in the range of 8.18-16.06 g. The thickness of shell was in the range of 1.11-2.60 mm. Also, kernel length ranged from 21.97-34.84 mm, kernel width ranged from 21.10-31.09 mm, and kernel weight ranged from 3.10-7.97 g. CONCLUSIONS: Based on important and commercial traits in walnut breeding programs, such as nut weight, kernel weight, kernel percentage, kernel color, and ease of kernel removal from nuts, 15 genotypes, including no. 92, 91, 31, 38, 33, 18, 93, 3, 58, 108, 16, 70, 15, 82, and 32 were superior and could be used in walnut breeding programs in line with the introduction of new cultivars and the revival of traditional walnut orchards to commercialize them.

Genetic relationships between sweet cherry (Prunus avium L.) and sour cherry (P. cerasus L.) as revealed using fruit characterizations and chloroplast microsatellites.

In the present study, the genetic diversity as well as the relationship between sweet cherry (Prunus avium L.) and sour cherry (P. cerasus L.) genotypes were investigated based on fruit traits and chloroplast microsatellites (cpSSRs). Analysis of variance showed that the studied genotypes have significant differences in the studied traits. In sweet cherries, the average fruit weight was 4.49 g with a coefficient of variation (CV) of 15.62%, the average stone weight was 0.34 g with a CV of 15.67%, and the average total soluble solids was 11.90% with a CV of 22.06%. Also, in sour cherries, the average fruit weight was 2.65 g with a coefficient of variation (CV) of 14.27%, the average stone weight was 0.28 g with a CV of 12.27%, and the average total soluble solids was 10.90% with a CV of 19.80%. Principal component analysis (PCA) showed that 83.80% of the observed variance was explained by the first three components. The cluster analysis separated genotypes of sweet and sour cherries and put them into two main groups. Four cpSSR primers produced distinct and different alleles among sweet and sour cherries. The cpSSR loci separated sweet and sour cherries from each other, which confirms the theory that chloroplast genome of sour cherry is not derived from sweet cherry. The present results provided new insights regarding the extent of diversity of individuals and also determined the relatedness and obtained information on genetic diversity of sweet and sour cherries.

Determination of the most appropriate fertilizing method for apple trees using multi-criteria decision-making (MCDM) approaches.

Appropriate tree fertilization with essential nutrients is considered as one of the major factors in enhancing the quality and quantity of horticultural crops. The most efficient way to fertilize trees is to dig holes around the trunks and fill them with appropriate chemical and organic fertilizer. Doing this operation with mechanized methods reduces costs and increases productivity compared to traditional methods. In the present study, multi-criteria decision-making (MCDM) methods, including deterministic analytical hierarchy process (AHP) and fuzzy analytical hierarchy process (FAHP), technique for order of preference by similarity to ideal solution (TOPSIS), fuzzy TOPSIS (FTOPSIS), and analytic network process (ANP), were used to score and select the appropriate fertilizing method for apple trees based on the growers and expert's perspectives. The criteria, including fertilizing operation cost, crop yield, the percentage of tree damages, ease of entering and moving fertilizing equipment in tree rows, field capacity (with or without machinery), comfort and safety of fertilizing operations, after-sales service, access to the required machinery and implements, crop selling price, and crop quality, were used in the above-mentioned methods. The fertilization methods (Hole digging) considered in the present study were traditional fertilization (Shovel), orchard Trencher, motor hole digger, fixed centerline tractor-mounted hole digger, and off-set tractor-mounted hole digger. Based on the results, the priority of mechanized fertilizing methods was determined as tractor-mounted hole diggers (AHP weight of 0.286, FAHP weight of 0.285, TOPSIS relative proximity of 0.65, and FTOPSIS relative proximity of 0.64), fixed centerline tractor-mounted hole diggers (AHP weight of 0.219, FAHP weight of 0.158, TOPSIS relative proximity of 0.56, and FTOPSIS relative proximity of 0.62), motor hole diggers (AHP weight of 0.171, FAHP weight of 0.079, TOPSIS relative proximity of 0.46, and FTOPSIS relative proximity of 0.31), and orchard trenchers (AHP weight of 0.12, FAHP weight of 0.057, TOPSIS relative proximity of 0.19, and FTOPSIS relative proximity of 0.20), respectively. Based on the ANP method, off-set and fixed centerline tractor-mounted hole diggers had the highest priority (weights of 0.43 and 0.27), followed by trencher (weight of 0.16), motor hole diggers (weight of 0.09), and the traditional method (weight of 0.04). Results showed that applying orchard tractors equipped with mounted diggers, especially off-set types, can play an important role in enhancing the quantity and quality of apples produced, as well as reducing the costs of fertilizing operations.

Association between quantitative morphological traits and RAPD molecular markers in pomegranate (Punica granatum L.).

Pomegranate (Punica granatum L.) is very important in terms of horticulture and food around the world. The present research aimed to identify the random amplified polymorphic DNA (RAPD) markers associated with morphological traits in pomegranate genotypes. Significant differences were observed among the studied genotypes based on the recorded traits. The 18 RAPD primers produced a total of 154 polymorphic fragments among genotypes. Using multiple regression analysis between each of the morphological traits and 154 RAPD polymorphic bands, RAPD markers associated with each of the morphological traits were identified. In total, 11 markers showed significant correlations with fruit weight, 9 markers with 100-aril weight, 11 markers with anthocyanin, and 8 markers with total soluble solids. Some markers were associated with more than one morphological trait, showing that the association of a marker with more than one trait can be caused by the pleiotropic effects of quantitative trait loci related to each other in different traits. For instance, the BA6-1 marker showed positive correlations with fruit weight, fruit crown width, and leaf length. Also, OPG13-3 and BA6-10 markers showed positive correlations with total soluble solids and anthocyanin content. The informative markers identified related to morphological characteristics in pomegranate can be a suitable guide to identify the genotypes with valuable fruit traits. Also, these markers can be used in selecting suitable parents for population generation for mapping purposes.

The effect of foliar application of Ascophyllum nodosum (L.) Le Jol. seaweed extract on biochemical traits related to abiotic stresses in pistachio (Pistacia vera L. cv. Kaleh-Ghoochi).

BACKGROUND: Due to the important economic role of pistachio (Pistacia vera L.) the cultivation of this valuable crop has been extended. Various abiotic stresses harm the growth and performance of pistachio. Seaweed extract containing various substances such as pseudo-hormones that stimulate growth, nutritional elements, and anti-stress substances can cause more resistance to abiotic stresses, and increase the quantity and the quality of the fruit. The present study was conducted to evaluate the effect of foliar application of Ascophyllum nodosum (L.) Le Jol. seaweed extract on some biochemical traits related to abiotic stress in Pistacia vera L. cv. Kaleh-Ghoochi. The first factor of foliar spraying treatment included A. nodosum seaweed extract at four levels (0, 1, 2, and 3 g/L), and the second factor was the time of spraying solution which was done at three times (1- at the beginning of pistachio kernel growth period at the end of June, 2- at the stage of full kernel development at the end of August, and 3- Spraying in both late June and August). RESULTS: The results showed that all investigated traits were significant under the treatment of seaweed extract compared with the control. The seaweed extract concentrations had a significant effect on all traits except soluble carbohydrates, but the time of consumption of seaweed extract on soluble carbohydrates, protein, peroxidase, ascorbate peroxidase, and superoxide dismutase enzymes was significant, while had no significant effect on the rest of the traits. According to the interaction effect of time and concentration of consumption of seaweed extract, the highest values of the biochemical characters were as follows: total phenol content: 168.30 mg CAE/g DW, flavonoid content: mg CE/g DW, catalase: 12.66 µmol APX min- 1 mg- 1 protein, superoxide dismutase: 231.4 µmol APX min- 1 mg- 1 protein, and ascorbate peroxidase: 39.53 µmol APX min- 1 mg- 1 protein. CONCLUSIONS: Based on the results of this study, it seems that it is possible to use fertilizers containing A. nodosum seaweed extract with a concentration of 3 g/L in August to increase the tolerance of the pistachio cultivar "Kaleh-Ghoochi" to abiotic stresses.

Relationship between molecular markers and important fruit-related traits in almond (Prunus dulcis [Mill.] D.A. Webb syn. P. amygdalus Batsch) as revealed using multiple regression analysis (MRA).

Almond (Prunus dulcis [Mill.] D.A. Webb syn. P. amygdalus Batsch) is one of the most important nut crops, and its kernel is the edible part that has a high nutritional value and is used in the confectionery and cosmetics industries. The present research aimed to identify random amplified polymorphic DNA (RAPD) and inter simple sequence repeat (ISSR) molecular markers associated with important fruit traits in late-blooming almond genotypes through multiple regression analysis (MRA). The studied genotypes showed significant differences from each other in terms of the measured fruit-related traits. The ISSR primers used produced a total of 125 bands in the studied germplasm, of which 112 showed polymorphic bands. The RAPD primers produced a total of 190 DNA fragments, of which 172 fragments showed polymorphism among genotypes. Some polymorphic fragments of ISSR and RAPD showed significant correlations with the fruit traits measured. Some of these informative markers were associated with more than one trait, which could be caused by the pleiotropic effects of quantitative trait loci related to each other in different traits. For instance, some of the markers showed significant correlations with both nut weight and kernel weight, which indicates a positive correlation between these two traits. Informative markers identified in this study can be used to select suitable parents for population generation for mapping. It is also useful for selecting superior genotypes, especially when information about their genetic basis, such as a linkage map, is not available.

Morphological characterization and interspecific variation among five species of Ziziphus genus to select superiors in Iran.

BACKGROUND: Several species of the genus Ziziphus are used worldwide for their medicinal and therapeutic properties. The present study aimed to investigate the phenotypic variation of five species of the Ziziphus genus, including Z. jujuba Mill. (25 accessions), Z. mauritiana Lam. (25 accessions), Z. spina-christi L. (25 accessions), Z. nummularia L. (10 accessions), and Z. xylopyrus Willd. (10 accessions) from Markazi, Sistan-va-Baluchestan, and Khuzestan provinces, Iran. RESULTS: The investigated accessions have significant differences in terms of all the measured as revealed using analysis of variance (ANOVA, P < 0.01). The range of fruit weight was 0.43-1.29 g in Z. jujuba, 17.85-29.87 g in Z. mauritiana, 0.94-3.44 g in Z. spina-christi, 0.93-2.02 g in Z. nummularia, and 0.91-3.02 g in Z. xylopyrus. All the measured traits showed significant and positive correlations with each other. Multiple regression analysis (MRA) results showed that fruit length, stone width, stone weight, stone length, and fruit width have significant effects on fruit weight, and thus their fluctuations have a significant effect on increasing or decreasing fruit weight. The accessions were grouped into two main clusters using hierarchical cluster analysis. The first cluster (I) included all the accessions of Z. mauritiana, while the second cluster (II) contained the accessions of the rest species forming two sub-clusters. CONCLUSION: Based on the commercial characters, accessions no. 12, 13, 17, 23, and 24 in Z. jujuba, accessions no. 3, 9, 17, 18, 20, 22, and 23 in Z. mauritiana, accessions no. 5, 6, 8, 13, 19, 22, and 24 in Z. spina-christi, accessions no. 3, 7, and 9 in Z. nummularia, and accessions no. 2, 4, 7, and 10 in Z. oxyphylla showed the highest fruit weight and thus can be suggested as superior for cultivation or use in breeding programs due to having larger fruits.

Morphological characterization of wild Prunus scoparia Spach accessions in 11 provinces of Iran.

Prunus scoparia (Spach) C. K. Schneid is among the most prevalent species which has the potential of being used as a dwarf rootstock for the cultivated almond. In the present study, the phenotypic variation of 521 wild accessions of this species naturally grown in 29 areas of 11 provinces in Iran was assessed. The accessions investigated showed significant differences based on the measured traits. The majority of the characters measured (90 out of 100) exhibited a coefficient of variation of higher than 20.00%, indicating considerable variation among the accessions. The range of nut-related characters was as follows: nut length: 9.72-22.87 mm, nut width: 5.81-15.54 mm, nut thickness: 5.67-12 mm, and nut weight: 0.18-0.99 mm. The range of kernel-related characters was as follows: kernel length: 6.83-19.23 mm, kernel width: 4.28-10.32 mm, kernel thickness: 2.16-7.52 mm, and kernel weight: 0.03-0.37 g. Kernel weight exhibited positive and significant correlations with nut length (r = 0.57), nut width (r = 0.54), nut thickness (r = 0.42), nut weight (r = 0.69), kernel length (r = 0.75), kernel width (r = 0.78), and kernel thickness (r = 0.58). Cluster analysis based on Ward's method showed two different major clusters among all the accessions. Based on the bi-plot created using principal component analysis of population analysis, the studied 29 natural habitats formed four groups. The studied accessions showed considerable variation in terms of the measured traits within and among populations. This variation is due to cross-pollination, cross-incompatibility, natural hybridization, propagation by seeds, gene flow, and exchange of plant material between the study areas. By using crosses between accessions of different regions, it is possible to increase the amount of variability in different traits of wild almonds.

Selecting the superior late-leafing genotypes of Persian walnut (Juglans regia L.) using morphological and pomological evaluations.

BACKGROUND: Late-spring frost is one of the major factors limiting and reducing yield of Persian walnut (Juglans regia L.) in temperate regions, including Iran. Therefore, in the present study, seedling-originated genotypes of walnut were investigated to identify late-leafing genotypes with high-quality kernels for direct cultivation in orchards or as parents in breeding programs. In the first step, the variation of the selected trees was investigated in terms of traits related to phenology, vegetation, and fruit. In the second step, late-leafing trees were identified and their traits related to kernel quality were investigated to identify superior genotypes. RESULTS: Strong variabilities were exhibited among the studied genotypes based on the traits recorded. The genotypes showed high variation based on dates of leafing, full male flowering date, and full female flowering date, including very early, early, moderate, and late. After recording the leafing date, 21 late-leaf genotypes were identified and evaluated to select the superiors among them in terms of kernel quantity and quality. Among them, the values of nut-related traits ranged as follows: nut length: 30.12-49.74 mm, nut width: 29.31-37.17 mm, nut weight: 8.77-16.47 g, and shell thickness: 1.15-2.25 mm. The values of kernel-related traits ranged as follows: kernel length: 22.35-35.73 mm, kernel width: 21.79-29.03 mm, kernel weight: 3.22-8.17 g, and kernel percentage: 35.08-53.95%. CONCLUSIONS: According to the ideal values and situations of commercial characteristics of walnut, twelve promising late-leafing genotypes (No. 9, 13, 32, 33, 72, 77, 78, 82, 83, 86, 92, and 98) were identified and are recommended for cultivation in orchards.

Selection of superior late-blooming almond (Prunus dulcis [Mill.] D.A.Webb) genotypes using morphological characterizations.

Almond (Prunus dulcis [Mill.] D.A.Webb) is one of the earliest domesticated trees and the evidence dates back to 3000-2000 BC. In the present study, 198 almond seedling origin trees were studied to select late-flowering genotypes having high kernel quality. Significant variabilities were exhibited among the genotypes investigated based on the recorded traits. Full-blooming date ranged from mid-March to mid-April. The Ward dendrogram clustered the genotypes into two major clusters forming several subclusters. After clustering the genotypes based on the full-blooming dates, 68 late-blooming genotypes were recognized and reanalyzed based on the quantitative characters to select the superior ones. Nut-related characters were as follows: nut length: 22.34-43.05 mm, nut width: 14.07-24.34 mm, nut thickness: 9.21-18.00 mm, nut weight: 1.88-6.62 g, and shell thickness: 2.26-4.59 mm. Kernel-related characters were as follows: kernel length: 16.73-25.91 mm, kernel width: 8.50-13.64 mm, kernel thickness: 3.56-7.37 mm, and kernel weight: 0.35-1.41 g. Kernel weight was positively and significantly associated with nut weight, kernel thickness, kernel length, kernel width, nut length, and branch leaf width. Thus, these key variables are the main traits accounting for kernel weight, and they should be considered together in breeding with aiming at increasing the kernel weight. Based on ideal values of the important and commercial characters of almond, such as fruit yield, nut weight, shell hardness, kernel shape, kernel weight, and kernel taste, 19 late-blooming genotypes were promising and are recommended for cultivation in orchards.

Morphological characterizations of parsnip (Pastinaca sativa L.) to select superior genotypes.

Parsnip (Pastinaca sativa L.) is an edible root that has long been used in cooking and preparing baby food and livestock. The present study was performed to evaluate the phenotypic diversity of 69 accessions of this species to select superiors in terms of root quality in Paykan village, Isfahan province, Iran, in the year 2022. There were significant differences among the accessions investigated (ANOVA, p < .01). Coefficient of variation (CV) was more than 20.00% in the majority of measured characters (64 out of 66 characters), indicating high diversity among the accessions. Foliage width (crown) ranged from 10 to 55 cm with an average of 32.32 cm. Root shape was tapering (33), obtriangular (10), narrow oblong (5), wide oblong (5), obovate (13), and fusiform (3). Root length ranged from 81.2 to 294 mm with an average of 166.44 mm. Root diameter at its middle point ranged from 15.58 to 125.12 mm with an average of 51.83 mm. Root weight ranged from 15 to 1200 g with an average of 315.36 g. Inner core (xylem) pigmentation/color was cream yellow (11 accessions), light yellow (12), yellow (42), dark yellow (2), and yellow-light orange (2). In the cluster analysis based on Ward's method, the accessions were divided into two main clusters according to morphological traits. This is despite the fact that parsnip is part of the medicinal plant native and valuable in most farms in tropical cities. Compared with carrots, parsnip plants are more adaptable to different environmental conditions. The accessions studied here showed high phenotypic diversity. Based on ideal values of the important and commercial characters of parsnip, such as root length, root weight, inner core (xylem) pigmentation/color, root shape, flesh color intensity, flesh palatability, and total soluble solids, 14 genotypes, including Parsnip-3, Parsnip-9, Parsnip-24, Parsnip-32, Parsnip-32, Parsnip-48, Parsnip-51, Parsnip-52, Parsnip-58, Parsnip-60, Parsnip-62, Parsnip-65, Parsnip-67, and Parsnip-69, were promising and are recommended for cultivation.

Mechanisms of salinity tolerance and their possible application in the breeding of vegetables.

BACKGROUND: In dry and semi-arid areas, salinity is the most serious hazard to agriculture, which can affect plant growth and development adversely. Over-accumulation of Na+ in plant organs can cause an osmotic effect and an imbalance in nutrient uptake. However, its harmful impact can vary depending on genotype, period of exposure to stress, plant development stage, and concentration and content of salt. To overcome the unfavorable effect of salinity, plants have developed two kinds of tolerance strategies based on either minimizing the entrance of salts by the roots or administering their concentration and diffusion. RESULTS: Having sufficient knowledge of Na+ accumulation mechanisms and an understanding of the function of genes involved in transport activity will present a new option to enhance the salinity tolerance of vegetables related to food security in arid regions. Considerable improvements in tolerance mechanisms can be employed for breeding vegetables with boosted yield performance under salt stress. A conventional breeding method demands exhaustive research work in crops, while new techniques of molecular breeding, such as cutting-edge molecular tools and CRISPR technology are now available in economically important vegetables and give a fair chance for the development of genetically modified organisms. CONCLUSIONS: Therefore, this review highlights the molecular mechanisms of salinity tolerance, various molecular methods of breeding, and many sources of genetic variation for inducing tolerance to salinity stress.

Morphological variability of wild-growing crown imperial (Fritillaria imperialis L.) germplasm in central region of Iran-implications for in-situ conservation initiatives.

BACKGROUND: Crown imperial (Fritillaria imperialis L.) is a threatened bulbous plant which has great ornamental and medicinal values and importance. In the present study, a total of 100 specimens of wild-growing F. imperialis from 10 natural areas of Markazi province, Iran, representing one of the main centers of genetic diversity of this species, were evaluated using 37 phenotypic attributes during April 2021. RESULTS: High level of genetic variation within populations (75%) and low levels of genetic variation among populations (25%) was revealed. The highest coefficient of variation (CV) was found in leaf trichome (82.00%) and then margin of crown leaves (80.44%). In addition, flower color (CV = 50.86%), flower number (CV = 44.61%), peduncle diameter (CV = 33.44%), and plant length (CV = 32.55%)-all important from an ornamental point of view- showed relatively high CV values. The CV was the lowest for flower shape, filament color, bulb shape, bulblet number, and floral scent. Ward cluster analysis identified two main clusters, containing 14 and 86 specimens, respectively. The first group consisted mainly of specimens from the adjacent Shahbaz and Rasvand populations. According to the principal component analysis (PCA), the first six components of data accounted for 88.36% of total variance. The Shahbaz-1, Shahbaz-2, Shahbaz-6, Shahbaz-7, Shahbaz-9, and Bolagh-8 specimens showed the highest variation and were separated from others, which they can be used further in breeding programs, while Sarchal-2, Bolagh-3, and Chepeqli-4 specimens showed the lowest variability. Moreover, the studied populations were clustered into four distinct groups, each including populations that were geographically close to one another. CONCLUSIONS: Although the examined specimens revealed high genetic diversity herein, the results indicated that wild-growing populations of F. imperialis are still at risk suffering from overcollection in the most of studied areas, especially in Deh-Sad and Tureh.

Selection of the promising accessions of jamun (Syzygium cumini (L.) skeels) based on pomological characterizations.

Jamun (Syzygium cumini [L.] Skeels) is one of the most potential underutilized fruit crops. Here, phenotypic and pomological variability among 61 accessions of this species was investigated. Analysis of variance (p < .01) revealed significant differences among the accessions studied based on the traits recorded. Ripening date ranged from late June to mid-July. Fruit color was purple in 13, dark purple in 30, and black in 18 accessions. Fruit weight ranged from 2.12 to 8.95 g, and fruit flesh thickness varied from 1.25 to 6.78 mm. Principal component analysis showed that fruit-related characters are very important in differentiating among selections. The studied accessions were divided into two groups and several subgroups based on cluster analysis, which showed the phenotypic variations among them. Beside the significant differences among the accessions of different regions, significant variation was observed between the accessions of each region. The obtained results are useful for designing conservation strategies for the germplasm as well as implementing breeding programs, such as introducing cultivars with different goals, including early or late ripening and seedless, nonastringent, large, and deeper color-fruits. Based on the fruit quality attributes, such as fruit weight, color, and taste; eight accessions, including Pirdan-3, Soldan-1, Pirdan-6, Soldan-5, Nasirabad-3, Soldan-3, Nasirabad-8, and Ganjabad-11, were selected which can be cultivated directly in orchards or used as parents in breeding programs.

Identification of the promising accessions of spistan (Cordia myxa Roxb.) using morphological and fruit-related traits.

Spistan (Cordia myxa Roxb.) is a potentially underutilized fruit plant in arid and semi-arid regions. It has long been associated with health and nutrition. Morphological diversity of 75 accessions of this species was evaluated. The accessions studied showed significant differences in terms of the characters measured. Ripening date varied from late May to mid-July. Fruit color was yellow-cream in 54, light orange in 8, and orange in 13 accessions. The range of fruit weight was 0.71-11.83 g with an average of 3.12, while fruit flesh thickness ranged from 0.63 to 7.86 mm with an average of 2.55, and fruit jelly part thickness varied between 1.34 and 6.40 mm with an average of 2.75. Principal component analysis could describe the evaluated traits as the nine main components that were able to justify 79.04% of total variance. Hierarchical clustering showed that the accessions were placed into two main clusters using the measured traits data, exhibiting a wide range of variability. Based on the traits related to selection of the ideal genotype, such as big fruit size, high fruit flesh thickness with high yield, and longer harvesting period, 11 accessions, including Jangal-4, Jangal-9, Rask-7, Jangal-5, Jangal-6, Jangal-11, Rask-1, Jangal-1, Rask-4, Rask-5, and Rask-2, were superior. It is recommended to use the best accessions selected in breeding programs. The commercial orchards of those best accessions should be extensively constructed to take advantage of the high yield of C. myxa as a crop and its medicinal properties.

Selection of promising accessions of phalsa (Grewia asiatica L.) based on fruit-related traits.

Phalsa or falsa (Grewia asiatica L., family Malvaceae) is a promising, yet underutilized berry fruit of tropical regions. It contains a rich source of various bioactive compounds, such as anthocyanins, tannins, phenols, and flavonoids. In the present study, morphological and pomological diversity of 48 accessions of this species was evaluated to introduce superior selections. Considerable variability was detected among the accessions studied based on the characteristics recorded. Fruit shape exhibited the highest CV (69.66%), while seed length showed the lowest CV (7.98%). Fruit color showed strong diversity, including red, red-purple, purple-cream, purple, and dark purple. Fruit weight ranged from 0.29 to1.14 g, and fruit flesh thickness varied from 1.90 to 3.91 mm. Principal component analysis (PCA) showed that 82.64% of the variability observed was explained by the first 13 components. A dendrogram created using cluster analysis grouped the accessions into two major clusters. Based on the traits related to fruit quality, such as fruit weight, fruit color, fruit flesh color, and fruit taste, 14 accessions, including Talsar-6, Talsar-8, Ganjabad-31, Talsar-4, Ganjabad-18, Ganjabad-24, Talsar-5, Ganjabad-25, Ganjabad-30, Ganjabad-17, Talsar-7, Talsar-3, Talsar-2, and Talsar-1, were superior. It is recommended to use the best accessions selected in breeding programs.

Multivariate analysis of eshnan (Seidlitzia rosmarinus Boiss.) based on morphological characterizations.

Seidlitzia rosmarinus Boiss. has been identified as one of the potential species that could be used for rehabilitating degraded desert rangelands and salt-affected soils due to its high salinity resistance and soil-stabilizing ability. Morphological variation of 144 accessions of this species from 14 regions of the Isfahan province, Iran was investigated. The accessions studied were significantly different in terms of the traits recorded. Three forms of plant growth habit were observed, including spreading bush, erect bush, and shrub. The range of leaf dimensions was as follows: terminal leaf length: 1.57-7.22 mm, terminal leaf width: 0.91-3.34 mm, basal leaf length: 11.84-45.27 mm, and basal leaf width: 1.32-4.18 mm. Fruit diameter (with wings) ranged from 0.19 to 12.91 mm, and 100-fruits dry weight varied between 0.11 and 0.76 g. A dendrogram created using Euclidean distances and the Ward's method revealed two main clusters. The obtained data revealed the morphological diversity within the studied populations. The reason for such a high diversity can be explained by a low probability of gene flow among the studied accessions. This is the first report on the application of morphological characteristics in the evaluation of the phenotypic variation of S. rosmarinus. This study presented a high phenotypic diversity of S. rosmarinus germplasm that could provide useful information for conservation and selection of cross-parents in breeding.

Identification of the promising mango (Mangifera indica L.) genotypes based on morphological and pomological characters.

Mango (Mangifera indica L.) is one of the choicest fruit crops of the tropical and subtropical regions in the world. Morphological and pomological diversity of 18 mango (M. indica) genotypes (with 3-10 replications for each genotype, 81 trees in total) was evaluated from four areas of Sistan-va-Baluchestan province, Iran. There were significant differences among the genotypes investigated based on the traits recorded. Harvest date ranged from late May to early August. Fruit skin ground color was highly variable, including light green, green, light yellow, yellow, and orange. The values of fruit dimensions-related characters were as follows: fruit length: 45.67-142.21 mm, fruit diameter: 37.51-94.13 mm, and fruit weight: 44.58-469.42 g. Peel and pulp percentages ranged from 65.24 to 92.45%. The quantity of fiber on stone was intermediate in most of the genotypes. Fruit weight showed positive standardized beta-coefficient (ß) values with stone weight (ß = 0.66, p < .00) and pulp and skin content (ß = 0.44, p < .00). Thus, these two key variables are the main traits accounting for fruit weight, and they should be considered together in breeding programs. Principal component analysis (PCA) showed 21 components explaining 85.44% of the total variance, and the first principal component (PC1) was positively correlated with fruit-related traits. A dendrogram created using Euclidean distances and the Ward's method revealed two main clusters. High dissimilarity levels among the studied genotypes showed high variability in the germplasm. Based on the traits related to fruit quality, seven genotypes, including GulabKhas, Chaunsa, Ghalami, Soldan, Porteghali, KalmiBozorg, and Jangal, were superior and are recommended to use for cultivation in commercial orchards for area-specific and in breeding programs.

Selection of the promising fig (Ficus carica L.) accessions using fruit-related characters.

Nowadays, fig (Ficus carica L.) fruits are consumed either fresh or dried and used for jam or spirit beverage production. Morphological and pomological diversity of 49 wild edible fig accessions sampled was evaluated. Analysis of variance revealed significant differences among the wild accessions studied using the morphological data recorded. Ripening time ranged from late July to mid-August. Fruit skin ground color showed high variability, including cream-purple (4 accessions), purple-yellow (8), light purple (7), purple (15), dark purple (5), purple-cream (3), and cream (7). The range of fruit-related traits was as follows: fruit length: 12.65-22.60 mm, fruit width: 10.67-24.18 mm, fruit fresh weight: 2.52-6.13 g, and fruit flesh thickness: 0.85-1.89 mm. Principal component analysis (PCA) showed 10 independent components that could explain 84.11% of total variance. Ward dendrogram created according to the data obtained revealed the variation among the accessions and showed two major clusters. The present results showed that the studied accessions had remarkable phenotypic variation, and among them, some accessions with high-quality fruits in size, color, and taste can be planted and then used in the breeding programs. Information on the current levels of genetic diversity of germplasm is essential for devising strategies for wild forms conservation.